| EUROKEDER ADVANTAGES |
2200 DTEX Fibers
2200 DTEX fibers are thicker than more commonly used
1100 DTEX fibers. Therefore Eurokeder has better
wear resistance and slides better.
2200 DTEX fibers are thicker than more commonly used
1100 DTEX fibers. Therefore Eurokeder has better
wear resistance and slides better.
ADVANTAGES FOR PERMANENT OR
SEMI-PERMANENT STRUCTURES:
1. UV-Resistance : keder cloth is less UV-resistant
than typical architectural fabric since there is no
coating to protect the fibers. Since Double Coated
Keder has regular fabric underneath the keder cloth,
UV degradation of the kedercloth does not impact the
longevity of the fabric structure.
2. Coated flag: the flag has a regular architectural
coating, white opaque, and any acccessories can be
welded directly to the flag. The most common
accessory to benefit is a beamflap, which can now be
narrower for a crisper finish of the fabric structure.
SEMI-PERMANENT STRUCTURES:
1. UV-Resistance : keder cloth is less UV-resistant
than typical architectural fabric since there is no
coating to protect the fibers. Since Double Coated
Keder has regular fabric underneath the keder cloth,
UV degradation of the kedercloth does not impact the
longevity of the fabric structure.
2. Coated flag: the flag has a regular architectural
coating, white opaque, and any acccessories can be
welded directly to the flag. The most common
accessory to benefit is a beamflap, which can now be
narrower for a crisper finish of the fabric structure.
| Brochures (click to download pdf files) |
Sold by: Lightweight Manufacturing Inc. 635 S 10th Street, Unit 600 Allentown, PA 18103 P 610 435 4720 F 866 864 9671 sales@lightweightmanufacturing.com |
ADVANTAGES FOR RENTAL
STRUCTURES:
1. Resistance against wear where regular keder
wears first. Where the keder slides against the edge
of the keder track, there is a double layer of fabric,
which greatly increases the resistance of the keder
against wear. This will make the panels last longer.
2. Coated flag: the flag has a regular architectural
coating, white opaque with PVDF topcoat. Therefore,
the flag is easy to clean, and any acccessories can
be welded directly to the flag. Additionally, when the
keder would be damaged, it can be cut off and new
keder welded directly to the flag.
STRUCTURES:
1. Resistance against wear where regular keder
wears first. Where the keder slides against the edge
of the keder track, there is a double layer of fabric,
which greatly increases the resistance of the keder
against wear. This will make the panels last longer.
2. Coated flag: the flag has a regular architectural
coating, white opaque with PVDF topcoat. Therefore,
the flag is easy to clean, and any acccessories can
be welded directly to the flag. Additionally, when the
keder would be damaged, it can be cut off and new
keder welded directly to the flag.
RF-Welded
Eurokeder is Radio-Frequency welded with a bar
welder. This creates a more straight keder product and
ensures a more consistent distance between the core
and the edge of the fabric, allowing the width of the
fabric panel to be more accurate. This is turn allows
usage of a tighter fabric.panel without problems
installing it.
Eurokeder is Radio-Frequency welded with a bar
welder. This creates a more straight keder product and
ensures a more consistent distance between the core
and the edge of the fabric, allowing the width of the
fabric panel to be more accurate. This is turn allows
usage of a tighter fabric.panel without problems
installing it.
DOUBLE COATED KEDER
DOUBLE COATED KEDER
LIGHTWEIGHT MANUFACTURING
